Maintenance Advice for Blowing Moulding Machine

Update:09 Apr 2018
Summary:

Blowing moulding machine has brought lots of benefits t […]

Blowing moulding machine has brought lots of benefits to people’s life, and with the use of blowing moulding machine, our society and life are becoming more and more convenience. Blowing moulding machine is a kind of plastic particles produced by the blow molding process into a hollow container equipment, the common models include the use of PP and PE a molding hollow extrusion machine, blowing machine using PET, PC or PP twice molding injection blow bottle machine, and developed new multi-story hollow extrusion blow and stretch blow molding.

Regular and suitable maintenance for blowing machine is very necessary, which can give the machine a long lifetime and produce high quality products. This article will introduce some maintenance advice from some aspects.

Feeding position. If the hopper is out of stock: we need to add material quickly. If the hopper is not out of stock please check quickly. Whether the elevator control contactor in electrical state, if it is to state, to check whether the motor is in power and load state, because this kind of situation is likely to be the bottle preform (germ) stuck elevator belt, then the simplest method is to promote human help. If the control contactor of the lifting machine is not in the current state, please check whether it is not in the same line with the reflector.

When the bottle is blown, it cannot be removed from the mold. First, the mold should be opened, with manual opening and closing mode. If it is normal, run it in an empty operation, if it is not normal, please check your exhaust time Settings. If you meet a lot of mold production normal chance to check on the open mold, please check the lock pin if there is a section of the screw inside, please check whether the clamping force is too big, if too big should be readjusted according to the standard. The bottle is always broken. The position of the manipulator is misplaced. Two mechanical hands collide. T



© Taizhou Huangyan Jilian Plastic Mould Co.,Ltd All Rights Reserved.

Web support by :HWAQ SITEMAP Pet Preform
Product Catalog

Products

Feedback

Please leave your Email or phone nomber, so we can contact you as soon as possible.

sailon.com.cn

Share