Blowing Moulding Machine Was Widely Used

Update:24 Dec 2018

The automatic wind ring is an online real-time control […]

The automatic wind ring is an online real-time control system. The system is controlled by several motors distributed on the wind ring. The cooling airflow sent by the fan is distributed to each air channel through the constant pressure of the air ring air chamber, and the motor drives the valve to open and close to adjust the size of the air outlet and the air volume, and change the cooling effect of the film blank at the die discharge.


Therefore, the thickness of the film is controlled. From the control process, there is no clear relationship between the thickness variation of the film and the amount of motor control. The thickness and thickness of the film and the different positions of the valve vary nonlinearly with the control amount, and each valve is adjusted. The influence on the adjacent points is very large, and the adjustment has hysteresis, so that the different moments are related to each other. For this highly nonlinear, strong coupling, time-varying and control uncertainty system, the exact mathematical model is almost impossible.


Blowing moulding machine is a rapidly evolving plastic processing method. The tubular plastic parison obtained by extrusion or injection molding of thermoplastic resin is heated (or heated to a softened state) and placed in a split mold. Immediately after closing the mold, compressed air is introduced into the parison to blow the plastic parison. It is inflated and adhered to the inner wall of the mold, and is cooled and demolded to obtain various hollow products.


The manufacturing process of the blown film is very similar in principle to the blow molding of hollow products, but it does not use a mold. From the perspective of classification of plastic processing technology, the molding process of the blown film is usually included in the extrusion. The blow molding process began to produce low density polyethylene vials during the Second World War. In the late 1950s, with the birth of high-density polyethylene and the development of blow molding machines, blow molding technology was widely used. Hollow containers can be up to several thousand liters in volume, and some have been computer controlled. Suitable plastics for blow molding include polyethylene, polyvinyl chloride, polypropylene, polyester, etc., and the resulting hollow containers are widely used as industrial packaging containers.

© Taizhou Jilian Plastic Mould Co., Ltd. All Rights Reserved.

Web support by :HWAQ SITEMAP Pet Preform
Product Catalog



Please leave your Email or phone nomber, so we can contact you as soon as possible.